Engineering, 22.08.2019 04:10 maggie123456751
Steam enters a nozzle at 400°c and 800 kpa with a velocity of 10 m/s, and leaves at 300°c and 200 kpa while losing heat at a rate of 25 kw. for an inlet area of 800 cm2, determine the velocity and the volume flow rate of the steam at the nozzle exit.
Answers: 3
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
Engineering, 04.07.2019 18:10
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
Engineering, 04.07.2019 18:20
An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.
Answers: 3
Steam enters a nozzle at 400°c and 800 kpa with a velocity of 10 m/s, and leaves at 300°c and 200 kp...
Mathematics, 09.10.2021 05:20
Mathematics, 09.10.2021 05:20
Mathematics, 09.10.2021 05:20
Mathematics, 09.10.2021 05:20
Mathematics, 09.10.2021 05:20
Mathematics, 09.10.2021 05:20
History, 09.10.2021 05:20
Mathematics, 09.10.2021 05:20
Mathematics, 09.10.2021 05:20
Mathematics, 09.10.2021 05:20