subject
Engineering, 22.08.2019 04:30 kiera2599

Aspherical hot air balloon is initially filled with air having 120 kpa pressure and 24 °c temperature. initial diameter of the hot air balloon was measured to be equal to 9.905 m. before operating balloon the operator filled the balloon with air having 120 kpa pressure and 24 °c temperature via an inlet having 1.458 m diameter. it took operator 17.108 minutes to fill balloon to its operation diameter of 16.502 m. calculate the velocity of air supply from the pump to the balloon through the inlet. give your answer in m/s having 3 decimal points.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
question
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
question
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
You know the right answer?
Aspherical hot air balloon is initially filled with air having 120 kpa pressure and 24 °c temperatur...
Questions
Questions on the website: 13722360