Engineering, 22.08.2019 16:10 gthif6088

Afour-cylinder, four stroke internal combustion engine has a bore of 12 cm and a stoke of 10 cm in each cylinder. the clearance volume is 12.5% of the cylinder volume at the bottom dead center. the process in each cylinder is modeled as an air-standard otto cycle with a temperature of 300 k and a pressure of 95 kpa at the beginning of compression and the maximum temperature of 1540 k in the cycle. the rate of added heat per unit of mass is 750 kj/kg, during the combustion process. (a) draw the puy diagram of the modeled otto cycle and mark the given temperatures, pressure, and added heat. (b) assume air to be an ideal gas with variable specific heats. (c) find the net work output per unit of mass and solve for the thermal efficiency and the mean effective pressure of the cycle.

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.

Answers: 1

Answer

You know the right answer?

Afour-cylinder, four stroke internal combustion engine has a bore of 12 cm and a stoke of 10 cm in e...

Questions