Engineering, 22.08.2019 18:10 hayyeet
Suppose you have a spring where the wire diameter, d = 0.0638" and the coil diameter, d= 0.478”. the spring is subjected to a force, f= 10.906 lbf. a. what is the stiffness constant, c? b. what is the bergstrasser factor, kb? c. what is the shear stress, τ?
Answers: 3
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
Suppose you have a spring where the wire diameter, d = 0.0638" and the coil diameter, d= 0.478”. the...
Chemistry, 06.12.2019 21:31
Mathematics, 06.12.2019 21:31
Computers and Technology, 06.12.2019 21:31