Engineering, 22.08.2019 23:10 VamPL
Technician a says that tinnerman can be discarded when removed. technician b says that one may have to cut off the hold downs pins before removing a worn brake drum. who is correct.?
Answers: 2
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:20
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
Technician a says that tinnerman can be discarded when removed. technician b says that one may have...
English, 21.05.2020 17:00
Mathematics, 21.05.2020 17:00
Mathematics, 21.05.2020 17:00
Mathematics, 21.05.2020 17:00
Mathematics, 21.05.2020 17:00
Computers and Technology, 21.05.2020 17:00
Mathematics, 21.05.2020 17:00
Mathematics, 21.05.2020 17:00
Mathematics, 21.05.2020 17:00