Engineering, 23.08.2019 03:20 chjam265
Acylindrical rod of 1040 steel originally 11.4 mm in diameter is to be cold worked by drawing; the circular cross section will be maintained during deformation. a cold- worked tensile strength in excess of 825 mpa and a ductility of at least 12%el are desired. furthermore, the final diameter must be 8.9 mm. explain how this can be accomplished?
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 03.07.2019 15:10
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
You know the right answer?
Acylindrical rod of 1040 steel originally 11.4 mm in diameter is to be cold worked by drawing; the...
Questions
History, 31.12.2019 13:31
Chemistry, 31.12.2019 13:31
Mathematics, 31.12.2019 13:31
Mathematics, 31.12.2019 13:31
