Engineering, 24.08.2019 05:10 blevinssam4783
An overhead crane carries a load of 50 tonne. under static conditions the maximum deflection is 5 mm (excluding the elongation of the ropes) and the maximum bending stress is ou mpa. the ropes have a combined cross-sectional area of 1 x 10-m². include the elongation of the rope and calculate the maximum deflection at the end of the rope and the maximum stress induced in the crane if the 50 tonne is lowered at a constant speed of 0,1 m/sec and then suddenly stopped when the rope has a length of (a) 3 m; and (b) 20 m (e = 210 gpa).
Answers: 3
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:10
Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.
Answers: 1
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
An overhead crane carries a load of 50 tonne. under static conditions the maximum deflection is 5 mm...
Mathematics, 26.07.2019 14:00
Mathematics, 26.07.2019 14:00
World Languages, 26.07.2019 14:00
World Languages, 26.07.2019 14:00
Mathematics, 26.07.2019 14:00
Mathematics, 26.07.2019 14:00
Mathematics, 26.07.2019 14:00
History, 26.07.2019 14:00