subject
Engineering, 29.08.2019 03:20 Soloaa

Air consumption for a 4-stroke si engine is measured by means of a circular orifice of diameter 30 mm. the cd for the orifice is 0.63 and the pressure across the orifice is 155 mm of water. the barometer reads 750 mm of hg. temperature of air in the room is 37°c. the piston displacement volume is 1780 cc. the compression ratio is 6.8. the fuel consumption is 8 kg/hr and having heating value of 43.6 mj/kg. the bp developed at 2500 rpm is 28 kw. determine, (a) volumetric efficiency, (b) air-fuel ratio, (c) brake mep, and (d) relative efficiency on the brake thermal efficiency basis.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
question
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
question
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
question
Engineering, 04.07.2019 18:20
Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?
Answers: 3
You know the right answer?
Air consumption for a 4-stroke si engine is measured by means of a circular orifice of diameter 30 m...
Questions
Questions on the website: 13722367