Engineering, 29.08.2019 16:30 niti1409

Asingle-stage centrifugal pump is to be used to pump water through a vertical distance of 30m at the rate of 45litres/s. suction and delivery pipes will have a combined length of 36m and a friction factor of 0.006. both will be 150mm diameter. losses at the valve, etc are estimated to total 2.4 times the velocity head in the pipe. the basic design of the pump has a dimensionless specific speed of 0.074 revs, forward curved impeller blades with an outlet angle equal to one-tenth of the diameter. the blades themselves occupy 5% of the circumference. if a manometric efficiency (neglect whirl slip)of 75% may be expected, determine a suitable impeller diameter.

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Plan an experiment to measure the surface tension of a liquid similar to water. if necessary, review the ncfmf video surface tension for ideas. which method would be most suitable for use in an undergraduate laboratory? what experimental precision could be expected?

Answers: 2

Answer

You know the right answer?

Asingle-stage centrifugal pump is to be used to pump water through a vertical distance of 30m at the...

Questions