Engineering, 29.08.2019 21:20 sanji8442
Agarden hose discharges water at the rate of 15 m/s. if the nozzle is held at ground level and directed θ = 30° from the ground, determine the maximum height reached by the water and the horizontal distance from the nozzle to where the water strikes the ground.
Answers: 1
Engineering, 03.07.2019 23:20
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 19:10
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
Agarden hose discharges water at the rate of 15 m/s. if the nozzle is held at ground level and direc...
Social Studies, 19.10.2019 10:50
Chemistry, 19.10.2019 10:50
Biology, 19.10.2019 10:50
English, 19.10.2019 10:50
Mathematics, 19.10.2019 10:50
Computers and Technology, 19.10.2019 10:50
Mathematics, 19.10.2019 10:50
Mathematics, 19.10.2019 10:50