subject
Engineering, 30.08.2019 21:20 alopez324789

Air at standard pressure flows across a flat plate at 3m/s. the temperature surface is 50â°c and the surrounding temperature is 20â°c. consider a point 1m away from the leading edge of the plate. see table a-15 in appendix 1 for properties of air. a. determine the reynold's number and prandtl number for this flow. b. determine the flow boundary layer thickness. c. determine the thermal boundary layer thickness for this flow. d. find the local nusselt number. e. based on this nusselt number, what is the local convective heat flux from the plate to the air?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
question
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
question
Engineering, 04.07.2019 18:20
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
question
Engineering, 04.07.2019 18:20
Wiy doeres rere okhn a pump whon working betwon the same pressure range?
Answers: 2
You know the right answer?
Air at standard pressure flows across a flat plate at 3m/s. the temperature surface is 50â°c and the...
Questions
Questions on the website: 13722362