Engineering, 31.08.2019 01:00 hermine40

Abrass ingot weighing 200lbm and having a surface area of 3.5 sq ft is at a uniform temperature of 100 f. itâs placed in a furnace where itâs exposed to an atmosphere at 2200 f. the surface film coefficient between the ingot and the furnace atmosphere is estimated to be 50 btu/hr-sq ft f. assume that the ingot has a negligible internal thermal resistance. for brass â=550 lbm/cu ft and the specific heat c=0.100 btu/lbm-f. whatâs the time in minutes it will take for the ingot to reach a temperature of 1500f?

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed.gi) ifn 1, what will happen to the material when transformed material when

Answers: 1

Answer

You know the right answer?

Abrass ingot weighing 200lbm and having a surface area of 3.5 sq ft is at a uniform temperature of 1...

Questions