Engineering, 02.09.2019 20:10 unicornqueen30
A200 mm long pipe slopes down at 1 in 100 and tapers from 0.25m diameter to 0.15 diameter at the lower end. if the pipe carries 100 litres of oil of specific gravity 0.85 find the pressure at the lower end. the upper end gauge reads 50 kpa.
Answers: 1
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
A200 mm long pipe slopes down at 1 in 100 and tapers from 0.25m diameter to 0.15 diameter at the low...
Computers and Technology, 27.04.2021 14:40
Computers and Technology, 27.04.2021 14:40
English, 27.04.2021 14:40
History, 27.04.2021 14:40
English, 27.04.2021 14:40