Engineering, 03.09.2019 03:30 jayzeptor
Apump is used to transfer h2o from the surface of a lake into a tank where pressure is maintained at 350 kpa. the pump operates in steady flow with an efficiency of 0.6 and has an iniet volume flow rate of 0.5m^3/s. making good engineering assumptions, do the following: a) calculate the actual power required to drive the pump. b) determine the volume flow rate at the discharge of the pump. c) show this process on a t-s diagram including the saturation curve.
Answers: 3
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 12:10
On a average work day more than work place firs are reorted
Answers: 1
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Apump is used to transfer h2o from the surface of a lake into a tank where pressure is maintained at...
Mathematics, 24.06.2021 19:00
Mathematics, 24.06.2021 19:00
Computers and Technology, 24.06.2021 19:00
Social Studies, 24.06.2021 19:00
Mathematics, 24.06.2021 19:00
Mathematics, 24.06.2021 19:00
Physics, 24.06.2021 19:00