Engineering, 03.09.2019 04:30 lexiissmartberysmart
Five kg of water is contained in a piston-cylinder assembly, initially at 5 bar and 240°c. the water is slowly heated at constant pressure to a final state. if the heat transfer for the process is 2960 kj, determine the temperature at the final state, in °c, and the work, in kj. kinetic and potential energy effects are negligible.
Answers: 1
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
Engineering, 04.07.2019 19:20
At steady state, air at 200 kpa, 325 k, and mass flow rate of 0.5 kg/s enters an insulated duct having differing inlet and exit cross-sectional areas. the inlet cross-sectional area is 6 cm2. at the duct exit, the pressure of the air is 100 kpa and the velocity is 250 m/s. neglecting potential energy effects and modeling air as an 1.008 kj/kg k, determine ideal gas with constant cp = (a) the velocity of the air at the inlet, in m/s. (b) the temperature of the air at the exit, in k. (c) the exit cross-sectional area, in cm2
Answers: 2
Five kg of water is contained in a piston-cylinder assembly, initially at 5 bar and 240°c. the water...
History, 04.12.2020 02:50
Geography, 04.12.2020 02:50
Health, 04.12.2020 02:50
Mathematics, 04.12.2020 02:50
Biology, 04.12.2020 02:50
English, 04.12.2020 02:50
Mathematics, 04.12.2020 02:50