subject
Engineering, 07.09.2019 02:10 ob3ymysins

Apelton wheel operates under a head of 274m. the jet diameter is 100mm the coefficient of velocity for the nozzle is 0.97, and the ratio of bucket speed to jet-speed is 0.47. the angle of deflection of the water in passing over the bucket is 160degrees and the relative velocity reduces by 10% in the process. calculate the diameter of the runner, the hydraulic efficiency, the power development at the bucket and the shaft power if the speed is 600 rpm and the mechanical efficiency is 0.9.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
question
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
question
Engineering, 04.07.2019 18:10
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
question
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
You know the right answer?
Apelton wheel operates under a head of 274m. the jet diameter is 100mm the coefficient of velocity f...
Questions
Questions on the website: 13722360