subject
Engineering, 09.09.2019 19:30 ggpro4life3000

Consider the ionic salt, kcl (potassium chloride). the attractive and repulsive energies between the ions k+ and cl depend on the distance r between them according to the following relationships: 5.86x10-6 e, = 1.436 e = r ey = ea +er where the energies are expressed in electron volts (ev) and the distance r is in nanometers (10°m). eis the net potential energy between the ions. (a) using excel, superimpose on a single plot ex, ex, and e, versus r, for r from 0.22nm to 0.5nm. build the spreadsheet first and then plot the functions. hint: use a fine enough interval between r values such that you can see a minimum ex value. (b) on the basis of this plot, determine (i) the equilibrium spacing r, between the k and clions, and (ii) the magnitude of the bonding energy e, between the two ions. (c) mathematically determine the r, and e. values using the equations above and compare these with the graphical results from part (b).

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
question
Engineering, 04.07.2019 18:10
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
You know the right answer?
Consider the ionic salt, kcl (potassium chloride). the attractive and repulsive energies between the...
Questions
question
History, 17.09.2021 15:30
question
Social Studies, 17.09.2021 15:30
question
Computers and Technology, 17.09.2021 15:30
question
Social Studies, 17.09.2021 15:30
question
English, 17.09.2021 15:30
Questions on the website: 13722361