Engineering, 10.09.2019 21:20 animaljamissofab

Aseries r-l circuit is given. circuit is connected to an ac voltage generator. a) derive equations for magnitude and phase of current and voltages on resistor and inductor in the phasor domain. assume that the resistance of the resistor is r, inductance of the inductor is l, magnitude of the source voltage is vm and phase of the source voltage is θ. note that you don’t have numbers in this step, so to find the magnitude and phase for current i and voltages vr and vl you must first derive both numerator and denominator in polar form using variables r, omega, l, vm, vphase (do not use numbers). the solutions should look like equations in slide 24/27! b) in this step, assume that r

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k

Answers: 2

Answer

Engineering, 04.07.2019 18:20

How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s

Answers: 2

Answer

You know the right answer?

Aseries r-l circuit is given. circuit is connected to an ac voltage generator. a) derive equations f...

Questions