subject
Engineering, 10.09.2019 23:30 dezmondpowell

The net potential energy between two adjacent ions, en, may be represented by en = -a/r + b/rn where a, b, and n are constants whose values depend on the particular ionic system. calculate the bonding energy e0 in terms of the parameters a, b, and n using the following procedure: (1) differentiate en with respect to r, and then set the resulting expression equal to zero, since the curve of en versus r is a minimum at e0. (2) solve for r in terms of a, b, and n, which yields r0, the equilibrium interionic spacing. (3) determine the expression for e0 by substitution of r0 into the above equation for en. what is the equation that represents the expression for e0?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
question
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
question
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
question
Engineering, 04.07.2019 18:20
Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.
Answers: 2
You know the right answer?
The net potential energy between two adjacent ions, en, may be represented by en = -a/r + b/rn where...
Questions
question
Social Studies, 04.10.2020 22:01
question
Mathematics, 04.10.2020 22:01
question
Mathematics, 04.10.2020 22:01
Questions on the website: 13722359