Engineering, 13.09.2019 20:30 charlesiarenee0

The pipe assembly is subjected to the 80-n force. determine the moment of this force about point a. the pipe assembly is subjected to the 80-n force. determine the moment of this force about point b. the force f = {6i + 8j + 10k} n creates a moment about point o of mo = {-14i + 8j + 2k} n middot m. if the force passes through a point having an x coordinate of 1 m, determine the y and z coordinate of the point. also, realizing that mo = fd, determine the perpendicular distance d from point o to the line of action of f. force f acts perpendicular to the inclined plane. determine the moment produced by f about point a. express the result as a cartesian vector. force f acts perpendicular to the inclined plane. determine the moment produced by f about point b. express the result as a cartesian vector. a 20-n horizontal force is applied perpendicular to the handle of the socket wrench. determine the magnitude and the coordinate direction angles of the moment created by this force about point o.

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Answers: 3

Answer

Engineering, 04.07.2019 16:10

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

Answer

You know the right answer?

The pipe assembly is subjected to the 80-n force. determine the moment of this force about point a....

Questions