Engineering, 13.09.2019 22:10 morganpl415
The velocity of steam leaving the nozzle of an impulse turbine is 900 m/s and the nozzle angle is 20°. the blade velocity is 300 m/s and the blade friction factor is 0.7. calculate for a mass flow rate of 1 kg/s and symmetric blading. a)-the blade inlet angle, b) the driving force on the wheel, c)-the axial thrust, d)-the diagram power, e)-the diagram efficiency.
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:20
Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.
Answers: 3
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
Engineering, 04.07.2019 18:20
Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg
Answers: 2
Engineering, 04.07.2019 19:10
What are the major differences between injection molding and extrusion?
Answers: 2
You know the right answer?
The velocity of steam leaving the nozzle of an impulse turbine is 900 m/s and the nozzle angle is 20...
Questions
Mathematics, 15.04.2021 21:20
Mathematics, 15.04.2021 21:20
Mathematics, 15.04.2021 21:20
Mathematics, 15.04.2021 21:20
Mathematics, 15.04.2021 21:20
Mathematics, 15.04.2021 21:20
