Engineering, 14.09.2019 00:10 hannah1571

Consider a finned-tube, cross-flow heat exchanger with both fluids unmixed. this heat exchanger is used to heat pressurized water with a flow rate of 1 kg/s from 35 to 125 c using exhaust gas. the exhaust gas enters the heat exchanger at 300 c and exits at 100 c. the overall heat transfer coefficient based on the gas-side area is uh=100 w/m2 .k. find the required gas-side heat transfer area, ah. use both ntu and lmtd methods and compare the results.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

The higher the astm grain size number, the finer the gran is. a)-true b)-false

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.

Answers: 3

Answer

You know the right answer?

Consider a finned-tube, cross-flow heat exchanger with both fluids unmixed. this heat exchanger is u...

Questions