Engineering, 14.09.2019 00:30 Destinyb9806
Ametallic material with yield stress of 140 mpa and cross section of 300 mm x 100 mm, is subjected to a tensile force of 8.00 mn. will the sample experience plastic deformation? you must justify your answer.
Answers: 2
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:10
Burgers vector is generally parallel to the dislocation line. a)-true b)-false
Answers: 2
Ametallic material with yield stress of 140 mpa and cross section of 300 mm x 100 mm, is subjected t...
Mathematics, 20.10.2021 01:00
Chemistry, 20.10.2021 01:00
Biology, 20.10.2021 01:00
Mathematics, 20.10.2021 01:00
Arts, 20.10.2021 01:00
Mathematics, 20.10.2021 01:00
Chemistry, 20.10.2021 01:00
Mathematics, 20.10.2021 01:00
Physics, 20.10.2021 01:00