Engineering, 14.09.2019 01:20 adygcarballo14
The diameter of an extruder barrel = 85 mm and its length = 2.00 m. the screw rotates at 55 rev/min, its channel depth = 8.0 mm, and its flight angle = 18°. head pressure at the die end of the barrel = 10.0(106) pa. viscosity of the polymer melt = 100 pa- s. find the volume flow rate of plastic at the die end of the barrel.
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 03.07.2019 14:10
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
Engineering, 04.07.2019 18:10
If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79
Answers: 1
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
You know the right answer?
The diameter of an extruder barrel = 85 mm and its length = 2.00 m. the screw rotates at 55 rev/min,...
Questions
Mathematics, 05.01.2021 01:40
Mathematics, 05.01.2021 01:40
English, 05.01.2021 01:40
Mathematics, 05.01.2021 01:40
Arts, 05.01.2021 01:40
English, 05.01.2021 01:40
English, 05.01.2021 01:40
English, 05.01.2021 01:40
Mathematics, 05.01.2021 01:40
