Asmall screwdriver is used to pry apart the two coils of
acircular key ring. the wedge angle o...
Engineering, 14.09.2019 01:30 lucy773
Asmall screwdriver is used to pry apart the two coils of
acircular key ring. the wedge angle of the screwdriver blade is
16degrees and the coefficient of static friction is 0.12 between
thecoils and the blade. knowing that a force p of magnitude 3.5 n
wasrequired to insert the screwdriver to the equilibrium
positionshown, determine the magnitude of the forces exerted on the
ring bythe screwdriver immediately after force p is removed.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
Engineering, 04.07.2019 18:10
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
You know the right answer?
Questions
Biology, 30.01.2020 19:05
Computers and Technology, 30.01.2020 19:05
Mathematics, 30.01.2020 19:05
History, 30.01.2020 19:05
Chemistry, 30.01.2020 19:05
Mathematics, 30.01.2020 19:05
English, 30.01.2020 19:05
