Engineering, 14.09.2019 01:30 UncleE123

In a steady flow system, the working fluid flows at a rate of 300kg/min. it enters the system with a pressure of 500kn/m2 , a velocity of 200m/s, internal energy of 2.2mj/kg and a specific volume of 0.42m3 /kg. it exits the system with a pressure of 120kn/m2 , a velocity of 140m/s, internal energy of 1.5mj/kg and a specific volume of 1.5m3 /kg. during its passage through the system the fluid losses 40kj/kg to the surroundings. find: i) the necessary diameters of the inlet and outlet pipes. (12 marks) ii) work done on or by the system. iii) the power developed by the system.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)

Answers: 3

Answer

You know the right answer?

In a steady flow system, the working fluid flows at a rate of 300kg/min. it enters the system with a...

Questions