Engineering, 14.09.2019 01:30 jessica01479

Arigid tank of total volume 0.2 m^3 initially contains saturated vapor r-134a at an absolute pressure of 10 bar (state 1). a supply line connected to the tank via a valve contains r-134a at an absolute pressure of 14 bar and temperature of 60 c. the valve is opened until 0.1 m^3 of the tank is filled with saturated liquid r-134a while 0.1 m3 of the tank is filled with saturated vapor r-134a, both at an absolute pressure of 12 bar (state 2). (a) what is the quality (%) of r-134a at state 2? (b) determine the heat transfer (kj) during the process. indicate whether it is into the system or out of the system.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

Answer

Engineering, 04.07.2019 12:10

On a average work day more than work place firs are reorted

Answers: 1

Answer

Engineering, 04.07.2019 16:10

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid

Answers: 3

Answer

You know the right answer?

Arigid tank of total volume 0.2 m^3 initially contains saturated vapor r-134a at an absolute pressur...

Questions