Engineering, 14.09.2019 02:20 drinkinwater
How much power would you need to cool down a closed, 1 liter container of water from 100°c to 20°c in 5 minutes? (a) 1.1w (b)1.1kw (c)67kw (d)334 kj
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.
Answers: 2
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
You know the right answer?
How much power would you need to cool down a closed, 1 liter container of water from 100°c to 20°c i...
Questions
English, 06.08.2019 16:10
English, 06.08.2019 16:10
English, 06.08.2019 16:10
Chemistry, 06.08.2019 16:10
Mathematics, 06.08.2019 16:10
Mathematics, 06.08.2019 16:10
English, 06.08.2019 16:10
English, 06.08.2019 16:10
