Gaseous propane enters a combustion chamber at 25 °c at a rate of 1.2 kg/min where it is mixed and burned with 150% excess air that enters the combustion chamber 127 °c. if the combustion is complete and the exit temperature of the combustion gases is 1200 k determine the mass flow rate of air and the rate of heat transfer from the combustion chamber

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.