subject
Engineering, 14.09.2019 02:30 tatumleigh04

Chips of width l =1 inch on a side are mounted to a substrate that is installed in an enclosure whose walls and air are maintained at a temperature of tsur = t[infinity]=25c. the chips have an emissivity of ε=0.60 and a maximum allowable temperature of ts =87c. 4.a) if heat is rejected from the chips by radiation and natural convection, what is the maximum operating power of each chip? the convection coefficient depends on the chip-to-air temperature difference and may be approximated as h =c(ts – t[infinity]) 1/4, where c = 4.2 w/m2 /k5/4. this is empirical formula, so simply substitute and solve. no need to put into the formula sheet.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
question
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
question
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
question
Engineering, 05.07.2019 19:10
Tech a says never use a water hose to clean up dust after a repair. tech b says never use a floor scrubber to clean up dust after repairs. who is correct?
Answers: 1
You know the right answer?
Chips of width l =1 inch on a side are mounted to a substrate that is installed in an enclosure whos...
Questions
question
Mathematics, 23.09.2019 20:50
question
Mathematics, 23.09.2019 20:50
Questions on the website: 13722361