Engineering, 14.09.2019 04:20 sleimanabir
For the mechanism shown in fig. 10.83, link 2 rotates at a constant angular velocity of 2 rad/s and slider 5 moves with a constant linear velocity of 254 mm/s. draw the velocity and acceleration polygons and determine vc and ac.
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
You know the right answer?
For the mechanism shown in fig. 10.83, link 2 rotates at a constant angular velocity of 2 rad/s and...
Questions
Mathematics, 20.12.2019 19:31
Business, 20.12.2019 19:31
History, 20.12.2019 19:31
Social Studies, 20.12.2019 19:31
Mathematics, 20.12.2019 19:31
Physics, 20.12.2019 19:31
History, 20.12.2019 19:31
Computers and Technology, 20.12.2019 19:31
Geography, 20.12.2019 19:31
