Engineering, 14.09.2019 05:30 rsanchez1226
Afire nozzle is supplied through 300 ft of 1.5 in. diameter, smooth, rubber-lined hose. water from a hydrant is supplied to a booster pump on board the pumper truck at 50 psig. at design conditions, the pressure at the nozzle inlet is 100 psig, and the pressure drop along the hose is 33 psi per 100 ft of length. determine (a) the design flow rate, (b) the nozzle exit velocity, assuming no losses in the nozzle, and (c) the power required to drive the booster pump, if its efficiency is 70 percent
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Engineering, 04.07.2019 18:20
Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.
Answers: 3
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
You know the right answer?
Afire nozzle is supplied through 300 ft of 1.5 in. diameter, smooth, rubber-lined hose. water from a...
Questions
Social Studies, 12.04.2021 20:10
Mathematics, 12.04.2021 20:10
English, 12.04.2021 20:10
Computers and Technology, 12.04.2021 20:10
Mathematics, 12.04.2021 20:10
Mathematics, 12.04.2021 20:10
Arts, 12.04.2021 20:10
Mathematics, 12.04.2021 20:10
Advanced Placement (AP), 12.04.2021 20:10
Mathematics, 12.04.2021 20:10
