subject
Engineering, 14.09.2019 05:30 marcos86

Apump steadily delivers water through a hose terminated by a nozzle. the exit of the nozzle has a diameter of 2.5 cm and is located 4 m above the pump inlet pipe, which ahs a diameter of 5.0 cm. the pressure is equal to 1 bar at both the inlet and the exit, and the temperature is constant at 20 degrees c. the magnitude of the power input required by the pump is 8.6 kw, and the acceleration of gravity is g= 9.81m/s2. determine the mass flow rate delievered by the pump in kg/s.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.
Answers: 1
question
Engineering, 04.07.2019 18:10
Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables
Answers: 1
question
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
question
Engineering, 04.07.2019 18:20
Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.
Answers: 1
You know the right answer?
Apump steadily delivers water through a hose terminated by a nozzle. the exit of the nozzle has a di...
Questions
question
Mathematics, 25.06.2019 18:30
question
Mathematics, 25.06.2019 18:30
Questions on the website: 13722363