2. a transmission line has the following per-unit-length parameters: l = 0.15 µh/m, c = 600 pf/m, r = 7.0 ω/m, and g = 0.01 s/m. calculate the propagation constant and characteristic impedance of this line at 2.4 ghz. if the line is 5 cm long, what is the total attenuation in db? recalculate these quantities in the absence of loss (i. e., r = g = 0). 3. a lossless transmission line is terminated with a 75ω load. if the swr on the line is 1.2, nd the two possible values for the characteristic impedance of the line. 4. calculate swr, reection coecient magnitude, and return loss values to complete the entries in the following tabl

Ashielded metal arc-welding operation is accomplished in a work cell by a fitter and a welder. the fitter takes 5.5 min to load components into the welding fixture at the beginning of the work cycle, and 1.5 min to unload the completed weldment at the end of the cycle. the total ength of the weld seams 1200 mm, and the travel speed used by the welder averages 300 mm/min. every 600 mm of seam length, the welding stick must be changed, which takes 0.8 min. while the fitter is working, the welder is idle (resting): and while the welder is working the fitter is idle. (a) determine the average arc-on time as a fraction of the work cycle time. (b) how much improvement in arc-on time would result if the welder used flux-cored arc welding (manually operated), given that the spool of weld wire must be changed every 10 weldments, and it takes the welder 5.0 min to accomplish the change? (c) what are the production rates for these two cases (weldments completed per hour)? attach your work and solutions.