Engineering, 19.09.2019 16:30 DESTROYERMODE2308

(a) making use of the fact that eq. (6.21) is an exact differential expression, show that: (∂cp/∂p)t = −t(∂2v/∂t2 )p what is the result of application of this equation to an ideal gas? final pdf to printer 6.10. problems 251 smi96529_ch06_210-263.indd 251 12/26/16 06: 13 pm (b) heat capacities cv and cp are defined as temperature derivatives respectively of u and h. because these properties are related, one expects the heat capacities also to be related. show that the general expression connecting cp to cv is: cp = cv + t ( ∂ ∂t ) v ( ∂ ∂t ) p show that eq. (b) of ex. 6.2 is another form of this expression.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.

Answers: 3

Answer

You know the right answer?

(a) making use of the fact that eq. (6.21) is an exact differential expression, show that: (∂cp/∂p)...

Questions