Apunching operation, performed by a cranked punch, requires 300j of work which is consumed during 30° of crankshaft movement. the torque pattern is rising steadily (from onm of torque) for 10°, constant for 10° and then falling steadily (back to 0nm of torque) for a further 10° of crankshaft movement. the remaining 330° of crankshaft movement involves no work. the shaft on which the flywheel is fitted rotates at a mean speed of 200rpm, and is permitted to vary ±5% in this application referred to determine the necessary moment of inertia the flywheel must have given that the other parts of the machine contribute 1.5 kg. m^2 the flywheel shaft

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?