Engineering, 29.09.2019 00:30 deepspy599otchpd
Anitrogen turbine, designed to deliver a power output of 15,000 btu/hr, operates with inlet conditions of 120 psia and 80 °f, and discharges nitrogen at a low pressure of 40 psia. assuming a turbine efficiency of 0.75, determine the temperature of the nitrogen at its discharge and the required mass flow rate of the nitrogen.
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 18:10
Burgers vector is generally parallel to the dislocation line. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
You know the right answer?
Anitrogen turbine, designed to deliver a power output of 15,000 btu/hr, operates with inlet conditio...
Questions
Mathematics, 17.12.2019 04:31
Spanish, 17.12.2019 04:31
English, 17.12.2019 04:31
Health, 17.12.2019 04:31
Physics, 17.12.2019 04:31
Physics, 17.12.2019 04:31
Computers and Technology, 17.12.2019 04:31
