subject
Engineering, 29.09.2019 02:30 shealwaysknows23

Atank of constant volume 50 m^3 initialy containing air at temp 10c and at pressure 253 kpa was being charged wit air at 5c by a compressor until the pressure was equal to 2.8 mpa. the work needed to compressed air was 35mj. during the process 25mj of heat flowed away frinm the tank to the atmosphere. assuming air to be ideal, diatomic gas of individual gas constant equal to 287 j/kgk. find the amount of air transferred to the tank and the final temp. of the tank. cv = 1/(k-1)r, cp = k/(k-1)r and k=1.4.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 04.07.2019 18:10
Burgers vector is generally parallel to the dislocation line. a)-true b)-false
Answers: 2
question
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
You know the right answer?
Atank of constant volume 50 m^3 initialy containing air at temp 10c and at pressure 253 kpa was bein...
Questions
Questions on the website: 13722367