On july 23, 1983, air canada flight 143 required 22,300 kg of jet fuel to fly from montreal to edmonton. the density of jet fuel is 0.803 g/ml, or 1.77 lb/l. the plane had 7682 l of fuel on board in montreal. the ground crew there multiplied the 7682 l by the factor 1.77(without units) and concluded that they had 13,597 kg of fuel on board and needed an additional 8703 kg by the factor 1.77(again without units) and concluded they needed to add 4916 l of fuel. they added 5000l. on its flight, the plane ran out of fuel and crash-landed near winnipeg, hundreds of kilometers short of its destination. (there were few injuries and no fatalities.) what mistake did the ground crew make? how much fuel(in l) should they have added before takeoff?

answer:

the formula for amps is watts divided by volts. to use the chart, cover up the a with your finger and use the remaining chart calculation of w divided by v. using our sample panel data, 60 watts divided by 12 volts equals 5 amps.

explanation:

One of the benefits of working with chlorinated polyvinyl chloride (CPVC) pipe is that it can be cut with a variety of different tools that don’t require any electricity or heat. However, different cutting methods are preferred over others, depending on the application.

When cutting CPVC pipe, it is important to make a square, flat cut. An uneven cut limits the bonding area and weakens the fitting.

To help you make the best possible cut, we’ve put together the following dos and don’ts when cutting CPVC pipe in different situations.

If the temperature goes on increasing with respect to the length (i.e temperature gradient)then it is called positive heat transfer. If the temperature gradient decreases then it is called negative heat transfer.

Explanation:

Which building?

Explanation:

There are many building styles to many different buildings. include a picture of what you're trying to build for others to be able to answer.