Engineering, 01.10.2019 03:00 summer5716
Consider an electric motor with a shaft power output of 20 kw and an efficiency of 88 percent. determine the rate at which the motor dissipates heat to the room it is in when the motor operates at full load. in winter, this room is normally heated by a 2-kw resistance heater. determine if it is necessary to turn the heater on when the motor runs at full load. (page 96).
Answers: 2
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
Consider an electric motor with a shaft power output of 20 kw and an efficiency of 88 percent. deter...
English, 18.08.2020 05:01
Mathematics, 18.08.2020 05:01
Advanced Placement (AP), 18.08.2020 05:01
Mathematics, 18.08.2020 05:01
History, 18.08.2020 05:01
Social Studies, 18.08.2020 05:01
Physics, 18.08.2020 05:01
Mathematics, 18.08.2020 05:01