Engineering, 01.10.2019 04:20 dedrell16

Athermocouple junction, which may be approximated as sphere, is to be used for temperature measurement in a gas stream. the convection coefficient between the junction surface and the gas is h = 400 w/m2 ·k and the junction thermophysical properties are k = 20 w/m·k, c = 400 j/kg·k and rho = 8500 kg/m3 . determine the junction diameter needed for the thermocouple to have a time constant of 2 s. if the junction is at 25 °c and is placed in a gas stream that is at 200 °c, estimate the temperature of the junction after 10 minutes. assumptions: 1. temperature of junction is uniform at any instant 2. radiation exchange with the surroundings is negligible 3. losses by conduction throug

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 19:30

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.

Answers: 3

Answer

You know the right answer?

Athermocouple junction, which may be approximated as sphere, is to be used for temperature measureme...

Questions