Engineering, 03.10.2019 01:30 mxwtwo
Asailboat has a rudder that is 6 in. wide and extends into the water a distance of 18 in. at 5 knots, what is the drag force exerted on the rudder?
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
Engineering, 04.07.2019 18:20
An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.
Answers: 3
You know the right answer?
Asailboat has a rudder that is 6 in. wide and extends into the water a distance of 18 in. at 5 knots...
Questions
Mathematics, 18.01.2021 21:00
Mathematics, 18.01.2021 21:00
Mathematics, 18.01.2021 21:00
English, 18.01.2021 21:00
Mathematics, 18.01.2021 21:00
Mathematics, 18.01.2021 21:00
Mathematics, 18.01.2021 21:00
Mathematics, 18.01.2021 21:00
