Engineering, 03.10.2019 03:00 adammartinez12
Afour-cylinder, four-stroke internal combustion engine has a bore of 3.7 in and a stroke of 3.4 in. the clearance volume is 16% of the cylinder volume at bottom dead center and the crankshaft rotates at 2400 rpm. the processes within each cylinder are modeled as an air-standard otto cycle with a pressure of 14.5 lbf/in.2 and a temperature of 60f at the beginning of compression. the maximum temperature in the cycle is 5200r. based on this model, calculate the net work per cycle, in btu, and the power developed by the engine, in horsepower.
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 23:20
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
Engineering, 04.07.2019 19:10
Asteel wire of 2 mm diameter is fixed between two points located 2 m apart. the tensile force in the wire is 250n, if its density of steel is given by 7830 kg/m3 the fundamental frequency of vibration hz? ?
Answers: 3
You know the right answer?
Afour-cylinder, four-stroke internal combustion engine has a bore of 3.7 in and a stroke of 3.4 in....
Questions
Mathematics, 29.05.2020 17:00
Mathematics, 29.05.2020 17:00
