Engineering, 05.10.2019 10:30 gomez1718
Ayacht of charactersitic length 35.82 m is being designed. the density and absolute viscosity of the water from the ocean where it would be used is 1022.8 kg/m^3 and 0.00106 pa. s respectively. the froude number associated with this concept yacht at its cruising speed is 0.71. if the 0.185 scaled down version of a yacht has to be tested in a towing tank which has a fluid of density of 980 kg/m"". what should be the absolute viscosity (rounded of to 6 decimal places) of the fluid in the towing tank to obtain a dimensionally similar flow condition. also calculate the cruising speed for the original yacht and give the answer in knots. viscosity of the fluid in the towing tank = cruising speed of the yacht =
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
Engineering, 04.07.2019 18:20
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.
Answers: 2
Engineering, 04.07.2019 19:20
Consider airflow over a flat plate of length l = 1.5 m under conditions for which transition occurs at le = 0.9 m based on the critical reynolds number, re,e = 5 x 10. evaluating the thermophysical properties of air at 400 k, determine the air velocity. (hint: use the tables to find the properties of air)
Answers: 3
Engineering, 06.07.2019 02:30
An electric motor is used to drive a power press which makes steel turning moment diagrams 323 pressings from a metal sheet. the motor runs at a mean speed of 50 rev/s. the torque required is 10.0nm for 0.2s, followed by 1.0nm for0.3 s with this sequence then being repeated. what is the minimum power required of the motor and the moment of incrtia required for the t1ywhcel if the speed fluctuations are to be restricted to 1.5%?
Answers: 3
You know the right answer?
Ayacht of charactersitic length 35.82 m is being designed. the density and absolute viscosity of the...
Questions
History, 26.02.2020 21:44
Mathematics, 26.02.2020 21:45
History, 26.02.2020 21:45
History, 26.02.2020 21:45
History, 26.02.2020 21:45
Mathematics, 26.02.2020 21:45
