Engineering, 05.10.2019 13:30 bnvghnbbb
Calculate the volume of a hydraulic accumulator capable of delivering 5 liters of oil between 180 and 80 bar, using as a preload gas 72 bar. suppose. a- isothermal cycle b- adiabatic cycle, charge in 25 seconds and discharge in 10 seconds.
Answers: 1
![V_o = \frac{5}{[\frac{72}{80}]^{1/1} -[\frac{72}{180}]^{1/1}}](/tpl/images/0289/6677/5e0c0.png)
![V_o =\frac{\Delta V}{[\frac{p_o}{p_1}]^{1/n} -[\frac{p_o}{p_2}]^{1/n}}](/tpl/images/0289/6677/5f425.png)
![V_o = \frac{5}{[\frac{72}{80}]^{1/1.4} -[\frac{72}{180}]^{1/1.4}}](/tpl/images/0289/6677/57f39.png)
Another question on Engineering
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
You know the right answer?
Calculate the volume of a hydraulic accumulator capable of delivering 5 liters of oil between 180 an...
Questions
Mathematics, 18.07.2019 05:10
Chemistry, 18.07.2019 05:10
Social Studies, 18.07.2019 05:10
History, 18.07.2019 05:10
Physics, 18.07.2019 05:10
Social Studies, 18.07.2019 05:10
Mathematics, 18.07.2019 05:10
Mathematics, 18.07.2019 05:10
Mathematics, 18.07.2019 05:10
Social Studies, 18.07.2019 05:10
