Engineering, 07.10.2019 22:00 demeckoferguson
You have two specimens both of which are cylindrical with a diameter of 20 mm and a length of 200 mm. one is made of a titanium alloy (e = 100 gpa) and the other is made out of stainless steel (e = 200 gpa). both of them are subjected to a tensile force of 500 n. which of them will have higher stress? which will develop higher strain? if possible, can you determine which of the specimens will be stronger?
Answers: 2
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:20
A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?
Answers: 3
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
You have two specimens both of which are cylindrical with a diameter of 20 mm and a length of 200 mm...
Mathematics, 01.02.2021 01:00
History, 01.02.2021 01:00
Health, 01.02.2021 01:00
Computers and Technology, 01.02.2021 01:00
Mathematics, 01.02.2021 01:00
Mathematics, 01.02.2021 01:00
Chemistry, 01.02.2021 01:00
Business, 01.02.2021 01:00
Mathematics, 01.02.2021 01:00
Mathematics, 01.02.2021 01:00