Engineering, 09.10.2019 03:10 joejoefofana

Aboeing 777 lands at chicago o'hare airport (668 m elevation) where the pressure is 98.8 kpa. this 777 wing has a coefficient of lift of 1.46 and its wing area is 4618.8 ft^2. when the plane left st. louis, its mass was 225,982 kg. note that kilograms is mass not weight, so you need to convert it. during the flight to chicago, 7,534 liters of fuel was used, where the jet fuel weighs 0.781 kg/l.
what is the velocity in miles-per-hour at the point where the aircraft initially touches the ground?

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Wiy doeres rere okhn a pump whon working betwon the same pressure range?

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Arigid tank contains 10 kg of air at 137 kpa (abs) and 21°c. more air is added to the tank until the pressure and temperature rise to 242 kpa (abs) and 32°c, respectively. determine the amount of air added to the tank. [r-0.287 kj/kg k]

Answers: 3

Answer

Engineering, 06.07.2019 02:30

On solidification from a melt, the polymer polyethylene forms a semi-crystalline spherulite structure. (i) sketch an individual spherulite and label the amorphous and crystalline regions. (ii) draw a schematic to show the changes in specific volume with temperature during cooling from the melt, comparing it to the theoretical extremes of fully crystalline and fully amorphous (indicate tm and tg)

Answers: 2

Answer

You know the right answer?

Aboeing 777 lands at chicago o'hare airport (668 m elevation) where the pressure is 98.8 kpa. this 7...

Questions