Engineering, 10.10.2019 21:30 alyssa5485
(15 points): use the bode command in matlab to plot the bode plots of the following transfer functions. carefully observe how different terms modify the bode magnitude and phase plots. for each transfer function, include a brief (1-2 sentence) statement that describes how its bode plots compare with the bode plots of similar transfer functions in the list below. (a) l(s) = s(s +1)(s +5)/(s + 10) (s +2) (b) l(s) = s(s+1)(s+5)(s+ 10) , , )/(s + 2)(s + 6) (c) l(s) = s(s+1s +5)(s + 10)/(s + 2)(s + 4) (d) l(s) = s(s + 1)(s+5)(s + 10)
Answers: 3
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
Engineering, 04.07.2019 18:20
Determine the damped natural frequencies and the steady state response of a decoupled damped forced two degrees of freedom system. 10ä1 + 2q1 20q1 10 cos t; 10q2 +4q2 + 40q2 10 cos t
Answers: 3
Engineering, 04.07.2019 18:20
For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor
Answers: 3
(15 points): use the bode command in matlab to plot the bode plots of the following transfer functi...
Physics, 25.10.2020 08:10
Mathematics, 25.10.2020 08:10
Arts, 25.10.2020 08:10
Mathematics, 25.10.2020 08:10
English, 25.10.2020 08:10
Mathematics, 25.10.2020 08:10
Mathematics, 25.10.2020 08:10
Mathematics, 25.10.2020 08:10
Physics, 25.10.2020 08:10
Mathematics, 25.10.2020 08:10