Engineering, 11.10.2019 04:20 depinedainstcom
Adisk shaped part is cast out of aluminum. diameter of the disk = 650 mm and thickness = 16 mm. if the mold constant = 3.2 sec/mm2 in chvorinov's rule, how long will it take the casting to solidify
Answers: 1
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:10
Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges
Answers: 1
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Adisk shaped part is cast out of aluminum. diameter of the disk = 650 mm and thickness = 16 mm. if t...
Social Studies, 18.10.2019 16:30
Health, 18.10.2019 16:30
Biology, 18.10.2019 16:30
History, 18.10.2019 16:30
Chemistry, 18.10.2019 16:30
Physics, 18.10.2019 16:30
Mathematics, 18.10.2019 16:30
History, 18.10.2019 16:30
Biology, 18.10.2019 16:30
Mathematics, 18.10.2019 16:30