subject
Engineering, 11.10.2019 05:30 jaydenjohnson6310

An aisi 1095 hot-rolled steel thick-walled tube has an outside diameter od=2 in and is subjected to an internal pressure 15 ksi. find the minimum inside diameter and thickness of this tube if the largest principal normal stress and maximum shear stress are not to exceed 80% of the minimum yield strength of the material?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
question
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
question
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
question
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
You know the right answer?
An aisi 1095 hot-rolled steel thick-walled tube has an outside diameter od=2 in and is subjected to...
Questions
question
Spanish, 23.07.2021 21:00
question
Mathematics, 23.07.2021 21:00
question
Mathematics, 23.07.2021 21:00
question
Mathematics, 23.07.2021 21:00
question
Mathematics, 23.07.2021 21:10
question
Mathematics, 23.07.2021 21:10
question
Biology, 23.07.2021 21:10
question
Mathematics, 23.07.2021 21:10
Questions on the website: 13722367